Izdelki za joda motorboot (7)

Brake Fluid DOT 3 is a excellent performance hydraulic brake fluid. It is use in automotive disc, drum and anti skid brake systems and clutch systems. Typical properties vary depending on the supplier of the fluid. Typical properties for brake fluids include: Density at 20º C, boiling point, wet boiling point, flash point and viscosity at 40º and 100º C. Applications : Brake fluid dot 3 is developed for use in applications where disc, drum and anti-skid braking systems are used in vehicles requiring DOT 3 level performance. Use only in its concentrated form out of a previously unopened or well sealed container. Seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this can reduce service life significantly. Do not reuse drained brake fluid. Brake fluid can affect the vehicle paintwork, so remove spills without rubbing. Brake fluid should be drained from the vehicle every two years or after 40,000 Kms.

Base Oil SN 300 is a defined as a light grade base oil and is a Grade I base oils. It is generally used in lubricant and lubricant additives production. It has been solvent refined and hydrogen treated to take out impurities. Applications : Base oil SN 300 works as a base stock for several industrial lubricants General purpose oils Mould oil Transmission fluids Gear oils Metal working fluids Additives Hydraulic oils Transformer oils Features : In order to ensure its purity, it has been solvent refined, dewaxed and hydrogen treated oil. It has long shelf life High thermal Stability Free from harmful chemicals. Used in mould oil, transmission fluids, gear oils, metal working fluids and additives.

Performance Standard : API SN/ SM / SL SAE 30 API SN/ SM/SL GASOLINE ENGINE OIL is a heavy duty engine oil primarily intended for use in gasoline automotive engines of passenger cars where a monograde motor oil SAE 30 meeting an API SN, SM, SL or SJ is recommended. Formulated from high quality mineral base oils and an advanced additive system required for combustion engines contains an effective balance of detergents and dispersants to minimize the formation of sludge and deposits, retain alkalinity and reduce wear. EVO E – Extra Protection to Engine, Clutch & Gears V – Value for Money with 70% Extra Mileage O – Outstanding Performance in all Weathers SAE Grade:30 Viscosity, @ 100ºC, cSt (ASTM D445):10.6 Viscosity, @ 40ºC, cSt (ASTM D445):7.2

Base Oil SN 100 SN100 is a light base oil with its parameters being at the low end for lubricant stock. It is a Group I base oil made by further processing vacuum distillates of specific crude oil fractions. It is mostly used in lubricant and lubricant additives production. Applications : Base oil SN 100 works as a base stock for several industrial lubricants General purpose oils Mould oil Transmission fluids Gear oils Metal working fluids Additives Hydraulic oils Transformer oils

Hydraulic Oil ISO 100 is good quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives good anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil ISO 100 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided.Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment. This can cover decay baptize analysis plants, reservoirs, waterways, parkland, drilling SAE Grade:100 Viscosity, @ 100ºC, cSt (ASTM D445):13 Viscosity, @ 40ºC, cSt (ASTM D445):99.8

El aceite hidráulico ISO 46 es de calidad excepcional, aceite hidráulico de alto rendimiento desarrollado para satisfacer el atractivo de los fluidos hidráulicos ambientalmente aceptables. Este producto se basa en ésteres sintéticos fácilmente biodegradables. Un paquete de aditivos cuidadosamente seleccionados y de alto rendimiento ofrece excelentes propiedades antidesgaste y de presión extrema, así como una buena estabilidad térmica y protección contra la corrosión. La resistencia a la oxidación inherentemente fuerte anticipa el engomado y la acumulación de gotas a las temperaturas más altas. Debido al alto VI natural del fluido base y al bajo punto de fluidez, el comportamiento de la temperatura de la viscosidad permite un rango de temperatura de funcionamiento muy amplio. El aceite hidráulico 46 se recomienda donde podría haber una pérdida accidental de fluido en el ambiente o donde se debe evitar la contaminación del agua superficial. Las áreas de aplicación SAE Grade:46 Viscosity, @ 100ºC, cSt (ASTM D445):9 Viscosity, @ 40ºC, cSt (ASTM D445):47

Estándar de rendimiento: API SN / SM / SL SAE 10W40 API SN / SM / SL EL ACEITE DE MOTOR DE GASOLINA es un aceite de motor semisintético que proporciona una larga vida útil del motor y protección contra los sedimentos y el desgaste. SAE 10W40 es un aceite para motor de motocicleta de cuatro tiempos avanzado. Ayuda a proporcionar un nivel excepcional de rendimiento en las motocicletas de alto rendimiento de hoy en día. Ayudará a mantener los motores de 4 tiempos funcionando en condiciones de protección en condiciones extremas. EVO E - Protección adicional para motor, embrague y engranajes V - Relación calidad-precio con un millaje extra del 70% O - Rendimiento excepcional en todos los tiempos SAE Grade:10W40 Viscosity, @ 100ºC, cSt (ASTM D445):13.0 Viscosity, @ 40ºC, cSt (ASTM D445):83.5